Product ID:WHITE TRAFFIC & ZONE MARKING PAINT, 11-3
MSDS Date:06/16/1992
FSC:8010
NIIN:00N034405
MSDS Number: BPXQN

PPG INDUSTRIES INC

4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: 412-492-5555;304-843-1300

Info Phone: 216-572-6111;800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

CALCIUM CARBONATE; (MARBLE),(LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 40-45%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

NAPHTHA, LIGHT ALIPHATIC (PETROLEUM) (THIS MATERIAL

CAS: 64742-89-8

Fraction By Weight: 20-25%

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 2-5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 15-20%

OF CANCER FROM EXPOS. POTNTL FOR INHAL OF

RTECS: 9999999ZZ

SINCE OVEREXPS NOT EXPECTED, THERE IS NO SIGNIFICANT

RTECS: 9999999ZZ

ARE INDICATIONS THAT SOLV LEVELS ARE TOO HIGH.

RTECS: 9999999ZZ

MAY INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING,

RTECS: 9999999ZZ

TOLUENE

RTECS: 9999999ZZ

REPROD HAZARDS. SEEK CONSULTATION FROM APPROP HLTH

RTECS: 9999999ZZ

AND SAFE HANDLING AND EXPOSURE RECOMMENDATIONS .

RTECS: 9999999ZZ

CAREFULLY TO DETERMINE THE TYPE OF AIRBORNE

RTECS: 9999999ZZ

AND HOW IT IS TO BE PROPERLY FITTED.

RTECS: 9999999ZZ

EXPOS LIMITS/LEL BELOW STATED LIMIT, & TO REMOVE

RTECS: 9999999ZZ

TITANIUM OXIDE;(TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ

TALC (POWDER), CONTAINING NO ASBESTOS

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 10-15%

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 0.2 FIBERS/CC

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL OR FATAL. EYE:CAUSES
IRRITATION. SKIN:MAY CAUSE MODERATE IRRITATION. INHAL:VAPOR & SPRAY
MIST MAY BE HARMFUL IF INHALED. VAPOR IRRITATES EYES, NOSE &
THROAT. REPEATED EXPOSURE TO HIGH V APOR CONCENTRATIONS MAY CAUSE
IRRITATION OF RESP SYS & PERM BRAIN & NERV SYS DMG. INTENTIONAL
MISUSE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:BY DELIBERATELY CONC & INHALING
CONTENTS MAY BE HARMFUL/FATAL. CHRONIC:AVOID LONG TERM & RPTD
CNTCT. PROD CNTNS TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE QTYS
OF TITANIUM DIOXIDE DUST IN A L ONG-TERM STUDY DEVELOPED LUNG
TUMORS. STUDIES W/HUMANS INVOLVED IN MFR OF PIGMENT INDICATE NO
INCR RISK (ING 7)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:DO NOT INDUCE VOMITING. EYE:FLUSH IMMEDIATELY WITH
PLENTY OF WATER FOR AT LEAST 15 MINUTES. SKIN:FLUSH IMMED W/PLENTY
OF WATER, FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER IF MATL
APPEARS TO ADHERE TO SKIN. INHAL:MOVE TO FRESHAIR. APPLY ARTF RESP
& OTHER SUPPORTIVE MEASURES AS REQ. IF INGESTION, ANY TYPE OF
OVEREXP OR SYMPS OF OVEREXP OCCUR DURING OR FOLLOWING USE OF PROD,
(SUPDAT)

Flash Point Method:PMCC
Flash Point:40.0F,4.4C
Lower Limits:1.3%
Extinguishing Media:NFPA CLASS B EXTINGUISHERS (CO*2, DRY CHEMICAL, OR
UNIVERSAL TYPE AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFTIVE BUT MAY BE USED TO COOL CLSD CNTNRS
TO PVNT PRESS BUILDUP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY ON (SUPDAT)

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERS
EQUIPPPED W/PROPER RESP & SKIN & EYE PROTECTION SHOULD BE PERMITTED
IN AREA. REMOVE ALL IGNITION SOURCES. TAKE UP SPILLED MATERIAL
W/SAWDUST, VERMICULITE OR OTHE R ABSORB MATL & PLACE INTO CNTNR FOR
DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGED AND PROTECTED FOR STORAGE OF NFPA
CLASS IB FLAMMABLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RSLTG MIXTURE
MAY HAVE HAZARDS OF ALL ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
POURING. AVOID FR EE FALL OF LIQ IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CNTRLS, VAP EXHST OR FRESH AIR ENTRY. NIOSH/MSHA APPROVD
(TC-23C-) AIR PURIFYING OR AIR SUPPLIED (TC-19C-) RESPS MAY ALSO
REDUCE EXPOS. READ RESP MFRS INSTRUCTIONS & LITERATURE (ING 14)
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOLUME & PATTERN
TO KEEP CONC OF INGREDS LISTED BELOW LOWEST SUGGESTED(ING 16)
Protective Gloves:NITRILE OR NEOPRENE RUBBER GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING OR
SHOES.
Supplemental Safety and Health
EXTING MEDIA:NFPA CLASS IB FLAMM LIQ FIRES. EXPLO HAZ:HOT SURFS. TOX
GASES MAY FORM WHEN PROD IS CNTCTD BY FLAME/HOT SURFS. FIRE FIGHT
PROC:AUTOIGNIT OR EXPLO WHEN EXPOSED TO EXTREME HEAT/IF WATER IS
USED, FOG NOZZ ARE PREF. FIRST AID PROC:CALL POIS CTL CTR, EMERG
ROOM OR MD IMMED; HAVE MSDS INFORMATION AVAILABLE.

HCC:F3
Boiling Pt:B.P. Text:>199F,>93C
Vapor Pres:20.2
Vapor Density:HVR/AIR
Spec Gravity:1.45
Evaporation Rate & Reference:32 (BUTYL ACETATE=1)
Solubility in Water:0
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED
Percent Volatiles by Volume:45.5

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PRODUCES HAZ DECOMP PRODS WHEN
HEATED.WELDING/BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
PRODUCE CARBON MONOXIDE.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.